AxC-DX8I User’s Manual V1.1
2
PRECAUTIONS
Do not apply excessive pressure on connectors or
any other part of the board. Do not touch the metallic
sharp parts (pins) of the product.
This product is electrostatic sensitive; make sure you
check this before touching or using it.
The disconnect devices of the Audio ToolBox unit are
the appliance inlet of the auxiliary power supply and
the appliance inlet on the rear side of the unit. These
must be easily reachable.
To prevent electric shock, unplug the unit before
handling. The achievement of other operations not
mentioned in this document is prohibited. Repairs
can be performed only by a technician trained and
qualified.
Each connection must be Safety Extra Low Voltage
kind (SELV), and must stay inside buildings.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited
to, the following:
