12
Basic Oper
ation
13
Advanced Operation
Zoom Mode
Auto:
displays the picture as broadcast.
Wide:
stretches the picture horizontally (will not remove black bars
built into some programs).
Zoom:
zooms in to show only the center portion (removes black bars
on sides of some programs).
Cinema:
zooms in to show center and stretches picture horizontally.
Restore Default
Restores the factory settings.
Channel Setup (TV only)
Antenna
Air
(over the air) /
CATV
(cable): Reception method options.
Auto Scan
Scan for channels. Erase previously saved channel information.
Auto Scan Add CH
Scan for channels, but keep previously saved channel information.
Channel Skip
(DTV
only)
Set the TV to skip specific channels found during autoscan.
Channel No
(DTV
only)
Switch the channel, but remain in menu mode.
Channel Label
(DTV only)
Lets you edit the program label that appears when a channel is
selected.
Advanced Operation
Setting up Channels
You must scan for available analog and digital channels when you set up your TV. If you
do not scan for channels, the
CH+
and
CH–
buttons will not function.
To scan for channels:
1.
Press
INPUT
to select
TV
mode.
2.
Press
MENU
and go to the
Channel Setup
page.
3.
Select
Auto Scan
. The TV begins to scan for available channels. You can interrupt
the scan by pressing and holding
MENU
on the TV.
4.
When the scan is complete, if you adjust the antenna, select
Auto Scan Add CH
to
add more channels to the scanned channel list.
5.
Press
MENU
again to exit the setting menu.
n
Note:
You can also access the
Auto Scan
menu by pressing
AUTO
on the
remote.
