How To Play MP3 CDs
- Insert a MP3 CD just as a normal CD (described on page 05) .
- Slide the Function switch to CD(MP3).
- The disc will spin and perform a full check of the entire disc.
- Once the check is complete, the first song (track) will start to play and the display will show “MP3”.
- At anytime during playback, press the Next/Back button to skip forward or backward one
track at a time.
- MP3 discs often have “Folders” (sub-directories) which contain groups of songs. To skip to a different
folder, press the Skip+10 / Folder button. (If the disc has more than 1 folder.)
How To Program The CD Player
- The CD player can be programmed to play up to 20 consecutive tracks in any given order as desired.
- Always press the Stop button before beginning any progamming.
- Press the Program button, the display will show and an “P01” will flash, to indicate that the set is
now in “Memory Programming Mode”.
- Press the Next/Back button to select the desired tracks (songs).
- When you scan to the numbered track you would like to program, simply press the Program button to
store that particular track into the Program Memory.
- Repeat the previous step to program all of the desired tracks (up to 20 total tracks) to be programmed.
- After the maximum 20 tracks have been programmed, (or less).
- Press Play to start the progress of the programmed tracks (songs).
- To clear the memory (cancel the programmed songs), simply press the Stop button or turn OFF the
unit entirely.
Troubleshooting
06
Problems
Possible reasons
Resolvents
Radio
Noise or sound distorted on
radio broadcasts
- Station not tuned properly for AM or FM. - Retune the AM or FM broadcast
station.
- FM: Telescopic antenna is not properly
adjusted.
- Extend wire antenna.
- AM: Unit is not positioned correctly.
- Rotate unit for best reception.
AM or FM, no sound
- Tuner is not selected.
- Slide the Function switch to
select the radio.
- Volume at minimum.
- Increase volume.
Compact Disc Player
CD will not play
- There is not a CD in unit.
- Insert a CD and press play.
- CD Function is not selected.
- Press FUNCTION button to select
CD.
- CD is placed with label side down.
- Flip the CD over where label side
is facing up.
- CD is scratched/damaged.
- Discard disc and use another.
- CD is wrong format.
- Make sure the CD is burned in an
MP3 file format.
P
