Connecting An External Powered Subwoofer (Not Included)
Specifications
- This unit has a built-in subwoofer connection which can be connected to any standard powered
subwoofer.
- By connecting to a powered subwoofer, the low frequency (Bass sound) can be strongly enhanced
to provice a much richer and deeper sound to your music.
- To use this facility, simply connect any standard powered sub woofer (easily available from most
music equipment shops) using the RCA jack on the rear panel of the main unit.
- Switch “On” the powered subwoofer.
- Play any music source (CD, Radio, or Aux.) as usual.
- You will immediately notice the deeper sound, which can be further enhanced by switching on
the "super bass" function on The main unit.
- Please note that the speakers should be connected as usual to the main unit, when using a subwoofer.
- Please note that "Passive" (non-powered) subwoofers will not work with this unit.
AC power supply:
AC 110V/220V ~ 50/60Hz
AC power consumption:
40W
Remote control unit:
3V (AAA size / UM-4 / LR03 / R03G x PCS)
Battery backup (Main Unit):
3V (AA size / UM3 / LR6 x 2 PCS)
(Batteries not included for both above)
Speaker:
6-way speaker system (2 x Tweeter / 2 x Mid / 2 x Woofer)
Speaker capacity power:
2 x Tweeter: 2” / 8 Ohm / 5W
2 x Mid: 4” / 4 Ohm / 2W
2 x Woofer: 4” / 4 Ohm / 10W
Amplifier maximum power:
10W RMS total
This unit should not be exposed to object that drip or splash of any liquids or filled with
liquids. This unit should not have any foreign object placed on top of it.
The marking is located at rear enclosure of the unit.
The mains plug is used as the diconnect device and it shall remain readily operable. To be
completely disconnected the power input, the mains plug of the apparatus shall be discon-
nected from the mains completely. The mains plug should not be obstructed or should be
easily accessed during intended use.
Under the influence of electrostatic phenomenon, the product may malfunction and may
cause the user to reset the power.
19
