30
Fully Functioning Push Buttons
To access the magnetic push buttons loosen one of the screws holding down the nameplate on the top of
the transmitter. Turn the nameplate out of the way; underneath are two push buttons labeled Zero and Span.
These magnetic push buttons are fully functioning (see menu tree in following pages).
31
To access the magnetic push buttons loosen one of the screws holding down the nameplate on the top of
the transmitter. Turn the nameplate out of the way; underneath are two push buttons labeled Zero and Span.
These magnetic push buttons are fully functioning (see menu tree in following pages).
Re-Ranging and Applying External PV
Press Zero (5 sec)
When display shows “–
ZR
–” re-
lease the button
Apply PV corresponding to de-
sired LRV (4mA) setting
Press Zero again. Display will
show
–
Z or
–
ZE if error occurs.
To adjust SPAN press SPAN button (5
sec)
When display shows “–
SP
–” re-
lease the button
Apply PV corresponding to de-
sired URV (20mA) setting
*IMPORTANT
It is highly recommended to use a PV source that is at
least +/- 0.005% accurate to avoid adding negative
bias to factory calibration. If accurate PV source is not
available please use push button menu 2.2 & 2.3 to re-
range accurately without need of applying an external
PV source.
Summary of Contents for 3100 A Series
