2
Dear Customer!
Thank you for choosing this heater! We have done everything possible to make this
product meet your requirements, while its quality satisfies the best world standards.
Introduction
.
The PLANAR heaters are designed to be used:
to keep the operator cabin warm;
to provide heating for various limited volume interior spaces in vehicles;
to maintain comfortable room temperatures for a long time.
The heater operates independently of the vehicle engine. The principle of
operation is based on forcing heated air through the heat exchanger system of the
heater.
Please read these instructions carefully to learn about all the functions of the heater.
Safety Instructions
.
Installation of the heater and its component parts must be
carried out by specialized organizations approved by the
manufacturer. Installation of the heater must be carried out only
by specialists in accordance with the installation instructions.
Health hazard
The heater may only be used for the purposes specified in this
manual.
Due to the risk of poisoning by exhaust fumes when the heater
is operating, the heater shall NOT be used in vehicles located in
closed and poorly ventilated premises (garages, shops, etc.).
Danger of property
damage
When refuelling the car, the heater shall be switched off.
The heater power shall not be disconnected until the end of
the purge cycle.
Any electrical connections or disconnections of the heater
shall NOT be carried out while the power is ON.
Do not step or put any items on the heater.
Do not put any garments, pieces of fabric, etc., on the heater,
nor place them in front of the intake or output of heated air.
After turning off the heater, reconnection should be made at
least after 5-10 seconds.
For safe operation of the heater, the customer service should
be contacted to identify and repair malfunction after two
consecutive failed start-ups.
