Autotek SM1400.4 Instructions Manual Download Page 12

10

As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio
products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier
to be free from defects in material and workmanship for one (1) Year from date of purchase.

All other parts and accessories of the system are warrantied to be free from defects in 
material and workmanship for one (1) year from date of purchase. Maxxsonics will
repair or replace at it’s option and free of charge during the warranty period, any system 
component that proves defective in materials and workmanship under normal installation,
use and service provided that the product is returned to the authorized Maxxsonics dealer
from where it was purchased. A photo copy of the original receipt must accompany the 
product being returned.

Valid purchase receipts will contain the name and address of the authorized reseller.

Any damage to the product as a result of misuse, abuse, accident, incorrect wiring,
improper installation, alteration of date code or bar code labels, revolution, natural 
disaster, or any sneaky stuff because someone messed up, repair or alteration out side 
of our factory or authorized service centers and any thing else you have done that you
should not have done is not covered.

This warranty is limited to defective parts and specifically excludes any incidental
or consequential damages connected therewith. This warranty is not to be construed
as an insurance policy.

Warranty on installation labor, removal, re-installation and freight charges are not the 
responsibility of Maxxsonics USA Inc.

Warranty products damaged as a result of insufficient or improper packing materials
are not covered by this limited warranty and such damaged product will be returned
“as is” at the expense of the owner.

 

Maxxsonics Limited Warranty

FOR EXTENDED WARRANTY INFORMATION, PLEASE VISIT

WWW.MAXXWARRANTY.COM

Summary of Contents for SM1400.4

















Reviews: