background image

Maxxsonics Limited Warranty

As the manufacturer of Maxxsonics, Autotek, Crunch, MB Quart and Hifonics car audio 

products Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier

to be free from defects in material and workmanship for one (1) Year from date of purchase.

All other parts and accessories of the system are warrantied to be free from defects in 

material and workmanship for one (1) year from date of purchase. Maxxsonics will

repair or replace at it’s option and free of charge during the warranty period, any system 

component that proves defective in materials and workmanship under normal installation,

use and service provided that the product is returned to the authorized Maxxsonics dealer

from where it was purchased. A photo copy of the original receipt must accompany the 

product being returned.

Valid purchase receipts will contain the name and address of the authorized reseller.

Any damage to the product as a result of misuse, abuse, accident, incorrect wiring,

improper installation, alteration of date code or bar code labels, revolution, natural 

disaster, or any sneaky stuff because someone messed up, repair or alteration out side 

of our factory or authorized service centers and any thing else you have done that you

should not have done is not covered.

This warranty is limited to defective parts and specifically excludes any incidental

or consequential damages connected therewith. This warranty is not to be construed

as an insurance policy.

Warranty on installation labor, removal, re-installation and freight charges are not the 

responsibility of Maxxsonics USA Inc.

Warranty products damaged as a result of insufficient or improper packing materials

are not covered by this limited warranty and such damaged product will be returned

“as is” at the expense of the owner.

 

10

AT-SERIES

FOR EXTENDED WARRANTY INFORMATION, PLEASE VISIT

WWW.MAXXWARRANTY.COM

Summary of Contents for ATX1000.2
















Reviews: