Autotek A6.2CS Installation Manual Download Page 2

INSTALLATION

The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker
components carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1. Choose a location that offers the least amount of obstruction between the components and your ears.

2. Try to mount the speakers on the same plane. That is, they should be at the same height and directly
across from each other. Do not mount one speaker higher, lower, further forward or further back from the
opposite speaker.

3. Always check behind the chosen mounting locations to ensure that there is proper clearance for the back
of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.

4. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker
deck. There should be no gaps between the speaker basket and the mounting surface.

CAUTION

Please ensure the correct polarity (+ or -) for all connections.
Never connect loudspeakers directly with the vehicle’s chassis or power supply.

WIRING DIAGRAM AND INTERCONNECTION

ENGLISH

PLUS

MINUS

PLUS

MINUS

WOOFER

TWEETER

IN-LINE

X-OVER

PLUS

MINUS

SPEAKER OUTPUTS OF THE AMPLIFIER

+    L    –

+    R    –

PLUS

MINUS

MINUS

PLUS

MINUS

PLUS

TWEETER

WOOFER

WOOFER INTERCONNENCTION:

•  Connect the plus-cable (white marking) of the included in-line crossover with the plus-terminal of the

woofer (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with
the minus-terminal of the woofer. Detect the correct cable-pair by the two different sized terminal jacks.

TWEETER INTERCONNECTION:

•  Connect the plus-cable (white marking) of the included in-line crossover with the “plus-terminal of the

tweeter (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with
the minus-terminal of the tweeter. Detect the correct cable-pair by the two similar sized terminal jacks.

AMPLIFIER INTERCONNECTION:

•  Connect the plus-cable (white marking) of the included in-line crossover with the plus-speaker output

of the amplifier (e.g. + L). Repeat this procedure with the minus-cable (no marking) and connect it with
the regarding minus-speaker output  of the amplifier (e.g. + L).

Repeat the above mentioned procedure for all other channels of the sound system.

Reviews: