background image

User Guide

 

P.19

 

Engine

 

Run

 

Time

 

If you have a gas engine, your remote starter can be programmed to run the engine for 3, 15, or 
25 minutes (15 minutes by default). If you have a diesel engine, the remote starter can be 
programmed to run the engine for 8, 20, or 30 minutes (20 minutes default). 

Turbo

 

Mode

 

If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user 
leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it 
is shut down by remote control), then shut down the engine. 
If your vehicle has an automatic transmission, proceed as follows to set the system to Turbo 
Mode: 

1.

 

With the engine running, make sure to release the brake pedal and press the 

 or   button on the transmitter until the parking lights come ON

Note: SmartStart™ can be setup to use the SmartStart™ icon to activate Turbo mode. 
2.

 

Remove the ignition key from the ignition switch. The engine will continue running. 

3.

 

Exit the vehicle and close all doors, hood and trunk. 

4.

 

Press the 

 button; this will lock the doors, arm the OEM-style alarm (if 

configured) and confirm that the vehicle is in Turbo Mode. 

5.

 

The engine will shut down after 60 seconds. 

If your vehicle has a manual transmission, follow all steps of the Ready Mode routine (page-9) to 
activate Turbo Mode. At the last step, 

 

Press 

  to lock the doors and have the engine shut down after 60 seconds; 

 

The parking lights will flash 3 times and remain lit.  

 

The alarm and starter kill will be armed. 

 

Press   to unlock the doors and have the engine shut down after 60 seconds; 

 

The parking lights will flash 3 times and remain lit.  

 

Press   To shut down the engine without affecting the doors. 

Note: The vehicle will enter Ready Mode once the engine run time expires. 

Siren

 

Chirps

 

The siren will chirp to confirm the system‘s basic operations: 

 

By default, when the doors are being locked, the siren will give 1 chirp if all the doors, 
the hood and the trunk are closed. 

 

If one of the doors, the hood or the trunk is open as the doors are being locked, the 
siren will chirp 3 times. 

 

When the doors are being unlocked, the siren will give 2 chirps if no intrusion was 
detected. 

 

If an intrusion was detected, the siren will 4 times if  

 is pressed. The system can 

alternatively be set to: (must be configured by the installer) 

 

Warning Mode: When arming, warns you with three (3) chirps if a door, the hood or the 
trunk is open. When disarming, warns you with four (4) chirps if the alarm was triggered. 

 

Open Zone Notification (the system will warn for doors opened up to 10 seconds after 
arming). 

 

No Chirp (the vehicle will not chirp under any circumstance). 

Summary of Contents for AS-6870
























Reviews: