background image

P. 2

 User 

Guide 

Table of Contents 

 

Introduction ....................................................... 2 
Vehicle Presets.................................................. 2 

Heater & Heated Seat .................................. 2 
Windshield Wipers, Radio & Headlights ...... 3 

Remote-Starting Your Vehicle ......................... 3 

Setting Your Vehicle Into Ready Mode........ 3 
Remote-starting............................................ 3 
Driving Off..................................................... 4 

Using the System.............................................. 4 

Arming and Disarming the System .............. 4 
Idle Mode...................................................... 4 
Turbo Mode .................................................. 5 
Valet Mode with the Valet Switch................. 5 
Ignition Valet................................................. 6 
Start Attempts Indicator (Valet Mode).......... 6 
Remote Valet Mode...................................... 6 
“Home Valet

TM

” Mode................................... 6 

Panic Mode .................................................. 7 
Quick Lockout

TM

........................................... 7 

Cold Weather Mode ..................................... 7 
Temporary chirp delete ................................ 8

 

Advanced Features: Installation-
programmable Options .................................... 8 

Remote Door Locks...................................... 8 
Priority Door Access..................................... 8 
Active or Passive Arming ............................. 8 
The Starter Kill and the Anti-grind Feature .. 8 
Shock Sense, Warn-away Sense ................ 9 
Disarmed Notification ................................... 9 
Siren Chirps or Horn Honks ......................... 9 
Car Finder..................................................... 9 
Siren or Horn Chirp Timing .......................... 9 
Safe Start...................................................... 9 
Home Valet 

TM

.............................................. 9 

Ignition-controlled Door Locks...................... 9

 

Ignition Re-lock........................................... 10 

Relock......................................................... 10 
Secure Lock ............................................... 10 
Turbo Mode ................................................ 10 
Remote Trunk Release .............................. 10 
Engine Run Time........................................ 10 
Extended Run Time.................................... 10 
Separate Start and Stop buttons................ 10 
Temperature Request (If ACC-Temp-101 
installed) ..................................................... 10 
Multi-car Operation..................................... 11 

Missing a Start or a Stop Confirmation ........ 11 
Multi-Level Features (

default state)

.............. 12 

Accessing the Multi-Level Features and 
Other Transmitter Functions ...................... 12 

Intrusion Codes through the LED Light ....... 13 
Troubleshooting Poor Transmitting Range . 13 
Using the Remote Control.............................. 14 
LCD Transmitter Operation (First Car Control)
........................................................................... 14 

Basic Vehicle Operation............................. 14 
Transmitter Mode Selection ....................... 15 
Time or Alarm Clock Adjustments.............. 15 
Cold Weather Mode ................................... 16 
Home Valet

TM

............................................. 16 

Safe Start Mode ......................................... 16 
Parking Countdown.................................... 16 
*Runtime Options (once the car has been 
remote started) ........................................... 16 

LCD Transmitter Operation (Second Car 
Control) ............................................................ 17 

Basic Vehicle Operation............................. 17 
Start and Stop While in Safe Start Mode ... 17 

Diagnostics – Chirps Table............................ 17 
Diagnostics – Parking Light Flash Table ..... 18 

 

Introduction 

This system is a state-of-the-art remote car starter and alarm combo system. The system is packed 
with advanced features such as priority access to the driver’s door and car finder (commodity 
features), last armed state memory in case of power failure (which ensures that the vehicle 
remains protected after a power failure recovery) and the safe start children safety feature.  With 
many advanced functions, this product will satisfy any one your expectations from high-end 
commodity and security systems, without neglecting any standard feature commonly offered by 
entry-level starters. 

Vehicle Presets 

Heater & Heated Seat 

When leaving the vehicle it is recommended to preset the accessory controls in preparation for the 
next remote start. Settings for the blower motor (fan), front and rear, as well as heated seats (if 
equipped) should not be left on 

HIGH

. It is recommended to leave the settings on 

LOW

 or 

MEDIUM

 

instead. 

Summary of Contents for AS-6650TW-FM



















Reviews: