Autostart AS-2300i TW-FM User Manual Download Page 5

User Guide

 P. 

 

 

Valet Modes 

When your vehicle is in valet mode, the remote starter functionalities are disabled. If the vehicle 
needs to be serviced, or if you park it indoors, the valet mode will prevent the engine from being 
remote-started accidentally. 

Ignition Valet 

This feature will allow you to remotely put your system into valet mode by using the ignition key 
instead of the valet button as above. Ignition valet can be used without a valet button installed. 

To put the system  i n t o   valet mode: 

Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into 
the 

IGNITION ON / RUN

 and 

OFF

 positions. 

The parking lights will flash three times to indicate that the vehicle is now in valet mode. The L.E.D. 
will come 

ON

 solid. 

To take the system  o u t   o f   valet mode: 

Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times successively into 
the 

IGNITION ON / RUN

 and 

OFF

 positions. 

The parking lights will flash twice to indicate that the vehicle is now out of valet mode. The L.E.D. 
will go out. 

Note

: With the ignition valet activated, the remote starter functions will be disabled. 

Remote Valet Mode 

This feature will allow you to remotely put your system into valet mode by using the transmitter 
instead of the valet button as above. 

Getting into valet mode 

 

Hold the 

UNLOCK

 

and 

START/STOP

 buttons simultaneously for 3 second. 

 

The parking lights will flash 3 times. 

The LED will remain on solid. 

Getting out of valet mode 

 

Hold the 

UNLOCK 

and 

START/STOP

 

buttons simultaneously for 3 second. 

 

The parking lights will flash 2 times. 

The LED will turn off. 

Note

: With the remote valet activated, the remote starter functions will be disabled. 

Panic Mode 

Note: 

Panic mode can only be activated if the horn has been adequately configured by your 

installer. 

In an emergency situation, you can activate panic mode by pressing and holding the 

SHIFT

 button 

for 3 seconds. If the vehicle is under a remote start, you can shutdown the engine, stop the horn 
and lock your doors by pressing the 

LOCK 

button: 

If the car is not running, you can stop the horn by pressing the 

LOCK 

or 

UNLOCK 

buttons but it will not 

lock or unlock the doors. 
Furthermore, the panic mode can be stop by activating one of the following three (3) features: 

a)

 

Remote valet (pressing 

UNLOCK

 and 

START/STOP 

for 3 seconds) 

b)

 

Ignition valet (turning the key inside the ignition switch from OFF to ON 5 times in a row) 

c)

 

By pressing the valet switch (if included). 

Panic Mode will automatically shut down after 25 sec. 

Summary of Contents for AS-2300i TW-FM














Reviews: