Autostart AS-1565 User Manual Download Page 3

SETTING THE UNIT INTO READY MODE 

 
This UNIT is designed for MANUAL transmission only, therefore must be set 
into READY-MODE in order to remote start the vehicle. 
If the system is not in READY-MODE the vehicle CANNOT be started by 
remote.  
 
To set the system into READY-MODE you must do the following: 

  

1.  Ensure all the doors are closed 
2.  Make sure shifter is in neutral 
3.  Start vehicle with the key 
4.  Apply the Parking brake 
5.  Within 20sec. push any button on transmitter. 

(Parking lights will flash 3 times quickly, and stay on) 

6.  Remove the key and vehicle will stay running.  
7.  Exit the vehicle and close the door. 
8.  Press and hold the LOCK button, the doors should lock and the vehicle 

shuts off. Press and hold the STOP button, the vehicle should shut off and 
the door should stay unlocked. 

 

NOTE:

 If no button is pressed, the system will run for 15 minutes, shut off 

and stay in READY-MODE without locking the doors. 

 

 

REMAINING IN READY MODE 

 
Once the vehicle is in Ready Mode you can start and stop the vehicle at will. 
However, should any of the following occur, the vehicle will exit Ready Mode 
thus eliminating the remote start option until Ready Mode is restored. 
 

1. Doors 

opened. 

2. Hood 

opened. 

3. Brakes 

pressed. 

4.  Parking brake disengaged. 
5.  Key turned to the on position. 
Should any of the above occur, ready mode will be cancelled.  

 

*NOTE: The unit will notify the user that it has exited Ready Mode by 
giving three slow flashes of the vehicles parking lights. 

 
 
 
 
 
 
 

USER SELECTABLE OPTIONS 

 
The AS-1565 was designed with flexibility and OEM integration in mind. With 
the integration of the following options, this unit can single-handedly control 
nearly any electrical system in your vehicle. 

 
The user selectable options are as follows: 
 
NOTE:

 The programming of your system should be left to a professional.       

Changing any of the settings may effect the operation of your AS-1565. 
 
 

REMOTE DOOR LOCKS OPTION 

 
If your AS-1565 was installed with the Remote Door Locks option, you will have 
the convenience of remote keyless entry.  
 
To 

UNLOCK

 your doors, press and hold the 

UNLOCK

 button for approx. 1 sec. 

The parking lights will flash twice to confirm that the doors have been unlocked. 
(If your system was installed with the Starter Disable option, this will also disarm 
the system). 
 
To 

LOCK

 your doors, press and hold the 

LOCK

 button for approx. 1 sec. The 

parking lights will flash once to confirm that the doors have been locked. (If your 
system was installed with the Starter Disable option, this will also arm the 
system). 
 
 

IGNITION CONTROLLED DOOR LOCKS OPTION 

 
This is an added security feature. If your system was installed with the Ignition 
Controlled Door Locks option, the doors will automatically be locked as soon as 
the key is turned to the ignition ON position, and you press the brakes. When the 
key us turned to the ignition OFF position, the doors will automatically be 
unlocked. 
 
 

SECURE LOCK OPTION   

 
This is an added security feature. If your Autostart was installed with the Secure 
Lock option, it will automatically lock your doors 4 seconds after your start your 
car by remote.

  

 

 
 
 
 

3

Reviews: