17
Monitor Configuration
Connecting the Prompt Monitor
Video Connections
Connect the video signal (for prompter display) using one of the
following options.
Connection using composite video or SDI to the prompter
monitor should always be made with screened 75Ω coaxial
cable. The video cable screen should be connected to
earth (ground) at both ends.
Dual HD-SDI IN
Power Switch
Tally I/O
HD-SDI In Prompter Monitor
HD-SDI In Talent Monitor
CVBS In Talent Monitor
CVBS In Prompter Monitor
12Vdc 4-pin XLR
LAN RJ45
LTC
Dual CVBS IN
LTC Connection
Tally I/O Connection
Ethernet Connection
Power Switch
For more information on the specification of connections see
Technical
Specifications
Power In 12Vdc
WARNING!
Always isolate the product from the power
supply before connecting the power supply lead.
Only use the supplied
4-pin XLR, 12-16.8Vdc
PSU, use of
non-approved PSU will invalidate the warranty.
When all connections have been
made, attach the power supply
and press the power switch to
turn prompter on.
Summary of Contents for EPIC-IP15
Page 35: ...33...