Autoscope Technology USB Autoscope IV Operation Manual Download Page 1 | Manualshive

Page: 1 / 21

background image

USB Autoscope IV – Operation Manual

Operation Manual for USB Autoscope IV

Please read this manual thoroughly before attempting to operate the device.

Contents

1. Purpose.......................................................................................................................................2
2. Technical characteristics of the USB Autoscope IV................................................................2

2.1 General...................................................................................................................................2
2.2 Analog oscilloscope mode.....................................................................................................3
2.3 Software.................................................................................................................................3
2.4 Parameters of the USB port's galvanic isolation....................................................................4
2.5 Front panel elements..............................................................................................................5
2.6 Back panel elements..............................................................................................................6
2.7 Power supply cable................................................................................................................7
2.8 Universal cable......................................................................................................................7

3. Preparing the computer for use with the USB Autoscope IV................................................8

3.1 Minimum Laptop or PC requirements...................................................................................8
3.2 Installation of the USB Oscilloscope program and utilities..................................................9
3.3 Installation of the device drivers..........................................................................................13

4. Preparing the device for use....................................................................................................14
5. USB Autoscope IV kit description..........................................................................................16
6. Manufacturer limited warranty.............................................................................................20
7. Troubleshooting........................................................................................................................20

7.1 The device does not turn on.................................................................................................20
7.2 "USB transfer error"............................................................................................................21

http://usbautoscope.eu/

1

1
2
3
...
»

Summary of Contents for USB Autoscope IV






















Reviews:

No comments

Related manuals for USB Autoscope IV

AJSPD850P - P2 DECK

Brand: Panasonic Pages: 73

Brand: Keithley Pages: 42

Brand: Tascam Pages: 128

Brand: ParaBody Pages: 6

Brand: Mackie Pages: 34

Brand: Mackworth Pages: 38

Brand: P&P Pages: 6

Brand: v.link Pages: 20

Brand: BCP Pages: 8

Brand: Joyolight Pages: 4

SynCore RW Unit

Brand: Ridder Pages: 28

Brand: Chauvin Arnoux Pages: 12

Brand: EMIT Pages: 6

Brand: unios Pages: 2

Brand: Kewtech Pages: 4

Brand: Campbell Pages: 22

Brand: Sport-thieme Pages: 4

Brand: SSP Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands