Autopot easy2grow 80 Set-Up Manuallines Download Page 2

Fit PotSock Squares 

over the bases 

of the pots

5

easy2grow 80 

setup instructions

If you require any guidance 

email - [email protected]

Advice

1

8

2

Put black marix 

discs in pots.

Fill pots with medium 

and pot up plants.

Water through pots 

and allow to drain 

outside the tray.

3

Remove collar.
Push 6mm pipe through 

collar and attach to 

AQUAvalve nozzle.
Rescrew collar - 

DON’T 

overturn... 

when you 

feel it grip 

STOP.

Place both pots in 

tray, make sure they 

are 

CLEAN!

Place lid over valve 

onto tray.

Allow your plants to establish for 7-10 days before turning system on

Cut 6mm/16mm pipe 

to appropriate length.

Connect AQUAvalve 

so ‘half moon’ is on 

T section in the tray.

Position tray 

so it is level

4

Plan views 

and options

Suggested layout

[email protected]  I  www.autopot.co.uk I   +44 (0)844 8581520

easy2grow 80 contents

Advice

easy2grow dimensions

Using your front instruction sheet, repeat the module set up instructions for the number of trays.

•   Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10 

days before turning your system on. This will encourage a stronger and healthier root system.

•   Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when 

there is approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.

•   For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency 

to block small pipe work.

•   Clean all substrate from the bottom and sides of the pots before placing in each tray. 

This will ensure your system is clean from the start.

•   Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles, 

coco/clay pebbles, rockwool/clay pebbles.

6

5

575mm

275mm

195mm

245mm

200mm

8.5 ltr

pot

•  1x 750 ltr FlexiTank
•  40x 2Pot tray & lid
•  80x 8.5 ltr pot 
•  40x AQUAvalve
•  1x 16mm click-fit tank adapter and filter 
•  4x 16mm in-line tap

•  20x 16 - 6mm cross connector
•  3x 16mm tee connector
•  20 metres of 16mm pipe
•  20 metres of 6mm pipe
•  80x marix disc 
•  80x PotSock Square

750 ltr

FlexiTank

900mm

1200mm

7

According to the size of your system connect your 

6mm/16mm pipe to relevant fitting or tank...

750 ltr

FlexiTank

16mm click-fit tank 
adaptor & filter

AQUAvalve

6mm pipe

16mm pipe

16mm In-line tap

16 - 6mm cross 
connector

16mm tee connector

Reviews: