4Pot XL system
setup instructions
Using your front instruction sheet, repeat the module set up instructions for the number of trays.
If you require any guidance
email - [email protected]
Advice
Allow your plants to establish for 7-10 days before turning system on
[email protected] I www.autopot.co.uk I +44 (0)844 8581520
Plan views
and options
Suggested layouts
• 1x 47 ltr tank and lid
• 4x 1Pot XL tray and lid
• 4x 25 ltr pot
• 4x AQUAvalve
• 1x 6mm top hat grommet
• 1x 6mm golf filter
• 2x 6mm in-line tap
• 2x 6mm cross connector
• 4x 6mm tee connector
• 4 metres of 6mm pipe
• 4x XL root control disc
4Pot XL system contents
1Pot XL dimensions
Advice
47 ltr
tank
375mm
300mm
615mm
• Pot up your plants, water through, then allow your plants to establish in the pots for a period of 7 to 10 days
before turning your system on. This will encourage a stronger and healthier root system.
• Always raise your tank to a minimum of 150mm above the highest AQUAvalve and re-fill the tank when
there is approximately a 1/3 of the solution left - NEVER ALLOW THE TANK TO RUN EMPTY.
• For best results, we recommend mineral fertilisers. Do not use organic fertilisers, as they have a tendency to
block small pipe work.
• Clean all substrate from the bottom and sides of the pots before placing in each tray.
This will ensure your system is clean from the start.
• Always use free draining substrates, for example: soil/perlite, coco/perlite, soil/clay pebbles,
coco/clay pebbles, rockwool/clay pebbles.
1
7
8
8
2
Place circular
root control disc
gold face down
in the pot.
5
Position tray so it is
level.
Push 6mm top hat grommet
into tank, then push 6mm
pipe through grommet.
Inside the tank push
6mm filter into 6mm pipe.
3
Remove collar.
Push 6mm pipe through
collar and attach to
AQUAvalve nozzle.
Rescrew collar -
DON’T
overturn...
when you feel
it grip
STOP.
Connect AQUAvalve
so ‘half moon’ is on T
section in the tray.
4
Fill pot with medium
and pot up plants.
Water through pot
and allow to drain
outside the tray.
Place pot in the
tray, make sure it is
CLEAN!
Place lid over valve
onto tray.
Cut 6mm/16mm pipe
to appropriate length
Connect your 6mm pipe
to the relevant fitting
6
380mm
285mm
25 ltr
pot
330mm
37
2m
m
275mm
6mm pipe
6mm top hat
grommet
6mm cross connector
6mm tee connector
6mm golf filter
AQUAvalve
6mm inline tap
Layout 1
Layout 2
47 ltr
Tank
47 ltr
Tank
6mm pipe
6mm top hat
grommet
6mm cross connector
6mm tee connector
6mm golf filter
AQUAvalve
6mm inline tap
Layout 1
Layout 2
47 ltr
Tank
47 ltr
Tank
