11
5
Unsuccessful
start
The heater was switched
off spontaneously at
startup
Make diagnostics of the heater
if the error appears again
6
Operation
cycle too
short
The heater was switched
off spontaneously
Make diagnostics of the heater
if the error appears again
8
CAN-bus
error
There is a problem with
module connection to the
CAN-bus
Check for the connection
9
Settings error Settings have been
stored in RCP’s memory
incorrectly
Reset the settings (8.1.1),
readjust the module
11
Heater no
connection
The heater is unplugged
or out of order
Make diagnostics of the heater
Glossary
CAN - Control Area Network (digital network for data transfer in vehicles)
RCP - Remote Control Plug-in (electronic module for the heater remote control)
CIP - Combined Instrument Panel
