11
In addition, the temporary valet mode will protect the trunk or hatch and trigger the RF-700 either is
opened, without the remote control, while in the care of the valet.
NOTE: The dedicated trunk trigger wire must be utilized for this function.
3. VALET FUNCTION WITH PASSIVE ARMING
If PASSIVE (Automatic) arming is selected, the RF-700 may be placed into the VALET (stand-by)
mode to allow for vehicle service, washing, or attendant parking without self-arming after the ignition has
been switch off, and without leaving the RF-700 remote control with unauthorized individuals.
To operate the VALET FUNCTION, push the momentary VALET/OVERRIDE switch to ON for 3
seconds. The siren or horn will chirp 3 times.
To return to normal operation, push the momentary VALET/OVERRIDE switch to ON for 3 seconds.
The siren or horn will chirp 2 times.
4. KEYLESS ENTRY MODE
In the valet mode, the vehicle doors can be locked and unlocked, and the trunk or hatch can be
released using the remote, if remote door lock/unlock and trunk/hatch release (*) has been installed.
However, there will be no chirp or LED confirmation. It is strongly recommended that the driver
visually confirm that the doors are locked or unlocked.
NOTE (*): Your vehicle must be equipped with power door locks, and electronic trunk/hatch release.
Optional relays may be required.
C. PASSIVE OPERATION (P)
The RF-700 provides a choice of arming capabilities. The alarm can be set to automatically arm each
time the vehicle is parked, or it may be armed manually. Refer to manual arming at the beginning of this
manual. The selection for PASSIVE (Automatic) or MANUAL (Active) arming is done with the
remote transmitter.
NOTE: The factory default setting is MANUAL arming.
1. PASSIVE ARMING
Switch off the vehicle ignition and exit the vehicle. Insure all protected openings are closed. The RF-
700 will count down for 30 seconds. After 30 seconds, the vehicle horn or siren will chirp one time,
and the parking lights will flash one time indicating the RF-700 has armed.
NOTE: If the optional power door lock feature is installed, and the PASSIVE (Automatic) door lock
feature has been selected during installation, the doors will automatically lock 15 seconds after the
PASSIVE arming cycle is completed.
Summary of Contents for RF-700
Page 20: ...20 ...
