background image

 

2

TRANSMITTER OPERATION:

 

 

  Button = Silent Arm/Disarm (DEFAULT)  

 

 

Silent Arm/Disarm 

 

 + 

 

3rd Channel Auxiliary 

Push Buttons Together 

 

  Button = 3

rd

 Channel Auxiliary (See Feature Programming “I”-4)  

 

 

3rd Channel Auxiliary 

 

 + 

 

 

Silent Arm/Disarm 

Push Buttons Together 

 
ACTIVE ARMING – LOCK & ARM: 

1.  Press 

 

 

button on transmitter. 

2.  The siren will chirp once and parking light will flash once indicating that the system is now 

armed. The vehicle doors will lock upon arming when interfaced with the security system. 

Note

Defective sensor reminder: 

If the siren sounds 3 chirps, then you have left a door, 

trunk, or hood lid ajar. (See Feature

 “I - 3 

Programming) 

SILENT ARM ING / DISARMING: 

Press the 

 

 button on the transmitter to arm or disarm 

your security system with no chirp sound heard; arm / disarm confirmation will be through the 
vehicles parking lights only. (factory default) 

Press the 

 

 + 

 

 buttons together for silent arm/disarm if you have the 

 

 button 

programmed to the 3

rd

 channel operation. (See feature-programming I-4) 

SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: 

Press the 

 

button on the transmitter 

twice within 3 seconds will arm the security system, by-pass the shock sensor or the optional 
sensor connected to 4 pin plug. The system will chirp one additional time to confirm the 
sensor bypass mode was activated. The sensor bypass feature is programmed to activate for 
one arming cycle only. The security system will return to normal operation during the next 
arming cycle. 

 

 
 
 

Transmitter Button 

System Function 

Remark 

   

Arm / Lock door  

 

 

– 

  

Arm and Delete Optional Sensor 

Press twice within 3 sec  

   

Car Locator  

System in Armed. 

   

Panic function 

Press 3 seconds  

   

Disarm & Unlock Door 

 

 

  

2 Steps Door Unlock / Disarm 
System 

Press twice within 3 seconds. 

   

2

nd

 Channel Trunk Release 

Press 2 seconds  

 - 

 

Passive Arming By-pass 

Press twice during  
passive arming 30 sec. timer 

Side button 

2

 

nd Car Operation Garage 

Door Opener 

Side Button Switching Code

 

Summary of Contents for RF-410









Reviews: