B. OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START:
To operate the vehicle while engine running from the remote start,
1. Insert the ignition key and turn it to “ON” (not the start) position.
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down.
C. TEMPORARY STOP FEATURE:
This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is
useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the
motor running and the climate control on.
1.Before turning off the engine, press the
button once on the transmitter and the LED indicator will flash 3 times to
confirm enter.
2.Turn the ignition key to OFF position. (The engine will stay running.)
3.The engine will run until the pre-programmed time elapsed or shutdown input is received.
D. TURBO CHARGE MODE:
Turbo charge mode keeps the engine running after arriving at you destination for a programmable period of 1, 3 or 5
minutes, This allows the vehicle’s engine time to conveniently cool down the turbo after you have left the vehicle. To
activate:
1. While the engine is running, pull up the hand brake and place the transmission gear in the park position.
2. Before turning off the engine, press and release
and
buttons at the same time.
-- The LED will flash indicating the remote start has entered the turbo charge mode
appear on LCD remote.
3. Take the “Ignition Key” from the key cylinder.
-- Engine keeps running. --
4. Exit and secure the vehicle.
--
Engine continues running until the pre-programmed time elapsed.
--
NOTE: This feature only applies to vehicles with Turbo Engines.
E. TIMER START:
This unit can be programmed to start and run the engine every 3 hours or punctually at the same time next morning,
the engine will run for the programmed running time and then shut down.
IMPORTANT
: Timer Start should be used only in open areas, never start and run the vehicle in on enclosed space as
a garage or carport.
Daily Timer Start:
The feature is very useful for the driver who wants to run the vehicle punctually at the same time
next morning. Before set-up of the “Daily Timer Start”, you should set you time for engine start.( see Timer Setting /
Timer set-up for “Daily Timer Start, page 21)
ENTER:
1. Press the
button once to remote start the vehicle. As soon as the vehicle is running and the parking lights have
turned on or are flashing.
2. Immediately depress the
button once, within 2 seconds
3-a.
3 Hours Timer Start:
Rapidly depresses the
button (or depresses
+
buttons, if you program
+
buttons = Start / Stop button.) The parking light will flash (3) times /
icon appear. The siren or horn chirps (3)
times. The vehicle is now programmed to start every 3 hours.
3-b.
Daily Timer Start:
Depress the transmitter “
F”
button first, within 3 seconds press
button. The parking
light will flash (6) times. The siren chirps (6) times. The vehicle is now programmed to start at the real time of the
next day. Your set time for the next day engine start flashes for approx. 3 seconds on the LCD screen. After 3
seconds
icon stays displayed on the LCD screen.
Or Follow page 5 programmed Daily Start Timer on LCD remote, then follow page 4 Table-3-4 p
ress
button of
LCD REMOTE TRANSCEIVER OPERATION
to activate or cancel
Daily Start feature.
4. Press the brake pedal to stop the vehicle running.
Exit the timer start:
Timer start can be exited manually as follows:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on. The LED and parking light will flash (4) times. The horn chirps (4) times. Or
1. Press the
button twice to remote start the vehicle. As soon as the vehicle is running and the parking light have
turned on or flashing.
2. Immediately depress the
button then press and hold the
button for 2 seconds. (or depresses
+
buttons, if you program
+
buttons = Start / Stop button.) The parking light will flash (4) times.
The siren or horn chirps (4) times. The vehicle is no longer programmed to start automatically.
F. TEMPERATURE CHECK
With the built in temperature sensor you can monitor, Through the LCD screen, the present indoor temperature of the
passenger compartment before cooling or heating your vehicle.
10
