SPT101
1
2
6
3
5
4
Fig.01
1-
; 2-
; 3-
Indicator ); 4-HV ( High Voltage Indicator ); 5-Power Indicator;
6- Switch;
Spark Plug Socket
Spark Plug Socket
HV ( High Voltage
2
Instruction
Place the Spark Plug into tester socket 1
or 2
.
Close up the protective cover , then plug in the adaptor to the
side socket , connect the tester to power supply.
Turn the switch 6
clockwise to power on tester, indicator 5
will
light up green.
Continue to turn the switch 6
clockwise, you can adjust the
working frequency between 1000rpm to 6000rpm/min, The
higher the frequency is set, the stronger the spark strength is.
Car Spark Plug Test Principle
In automobile ignition system, the high-
voltage ignition coil
generates a high-voltage, and the spark plug diverts
it form high -tension ignition coil into the cylinder
engine, spark between the spark plug electrodes will
ignite the mixture, The Detector could tell the good
spark
plugs from the bad by the strength of the
spark.
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in
different countries, the trademark is .With regard to
the other trademark, service logo, domain, icon and company
name mentioned in this manual, they shall all belong to AUTOOL
and its other affiliated company, in other countries without the
registration yet of these trademark, service logo, domain name,
icon and company name of AUTOOL, here we announce they are
owned by AUTOOL. Any company or person shall not use the
trademark, service logo, domain name, icon and company name
of AUTOOL before getting approved by AUTOOL with written
certificates. Please visit our website www.autooltech.com or
email at [email protected] to contact us.
Caution
Up to 1000V voltage will be generated during test, Please close
the protective cover before testing
！
1
