Autonomous - Smart office
www.autonomous.ai
9469-5 Opal Ave - Mentone, CA 92359
+1 844-208-6205
8am - 5pm PT
1. Adjust SmartDesk’s height
Press “Up” or “Down” button to adjust the height of the desk.
2. Program pre-set buttons
To use the presets on the SmartDesk, please follow the steps:
Set the desk to the height you like.
Press the M button until the LED flashes.
Press the number you want the desk set to.
3. Reset the desk
Unplug the power cord to the control box.
Unplug the cable from the keypad to the control box.
Plug all the cables again.
Do the reset: Press up and down buttons at the same time until it beeps and goes down to the
Lowest level: Release both buttons, then press only down until it shows the exact height.
Your desk is ready to use.
Before use make sure that:
The legs are level and start at the lowest position.
All the screws are tightened or else the desk will make noise/ wobble.
When moving the desk, DO NOT lift the desk by the desktop alone. Support both the frame
and the desk top equally. Favoring one over the other can stress the fasteners connecting
the desk frame to the desktop. Lower the desk completely before moving it.
Choose a placement for the desk that’s a safe distance from window frames, radiators,
furniture, etc., so that people do not get stuck or trapped by the desk, and nothing obstructs
the desk from rising or lowering.
Ensure adequate cord clearance before using the desk. Connect desk’s power cord to the
110V - 240V
outlet to make the desk ready for use.
Do not place any objects underneath the desk that are taller than 25’’.
DESK PLACEMENT
Autonomous-Smart office
+1 844-208-6205
Smart Office
9469-5 Opal Ave - Mentone, CA 92359
www.autonomous.ai
ABOUT
Autonomous is a global network of innovators. We’re engineers who
take apart your day, examine the pieces, and then reassemble your
routine to help you #worksmarter. Our sole focus is towards realizing
the gold standard of the smart office industry.
visit autonomous.ai/warranty.
