Autonics LP-A Series User Manual Download Page 41

Page: 41 / 106

3 System Organization

© Copyright Reserved Autonics Co., Ltd.

3.3

1:N Communication of Different Controllers

1:N communication stands for one LP communicating with multiple of controllers.

The LP observes the connected controllers or relays data between controllers.

The LP can communicate with the multiple of different controllers.

3.3.1

1:1:1 Communication

A GP can communicate with a signle controller A and a signle controller B.

The GP relays communications between the controller A and B.

Series

Connecting port

Description

LP-A070

RS422 or RS232C-A port,

RS232C or RS232C-B port,

Ethernet port

Direct communication available

Link device communication available

LP-A104

RS422 or RS232C-A port,

RS232C or RS232C-B port,
Ethernet port, CAN

※

port

Direct communication available

Link device communication available

※

Only Autonics’ ARD Series can be connected to CAN port.

Summary of Contents for LP-A Series











































































































Search results

Summary of Contents for LP-A Series

Reviews:

Related manuals for LP-A Series

Brands by name

Popular brands

Autonics LP-A Series, User Manual

Search results

Summary of Contents for LP-A Series

Reviews:

Related manuals for LP-A Series

Brands by name

Popular brands