Autonics krn100 series User Manual Download

Page: 81 / 82

Modbus Mapping Table

© Copyright Reserved Autonics Co., Ltd.

3.4.7

FILE/MEMORY SETUP(File/Memory setting)

No(Address)

Func

R/W Parameter

Description

Set range

Unit Default

Note

401651 (0672) 03/06/16 W

Load Parameter
Set File

※

Open parameter setting

file

0: None,
1: default.pms

※

2: User1.pms,

3:User2.pms,

4:User3.pms,

5:User4.pms,

6:User5.pms

None

Disable to set

in User mode.

401652 (0673) 03/06/16 W

Save Set File

Save parameter setting

file

0: None,

1: User1.pms,

2:User2.pms,

3:User3.pms,

4:User4.pms,

5:User5.pms

None

401653 (0674) 03/06/16 R

Memory Status Memory capacity

0 to 100

401654 (0675) 03/06/16 W

Memory Clear

※

401655 (0676) 03/06/16 R/W Memory Save

Option

Memory storage option 0:Stop, 1:Overwrite

Overwrite

401656 to

401700

03/06/16 -

Reserved

※11.

This setting changes overall system settings. After the setting, communication setting is

also changed and communication may be disconnected. Be careful that changed alarm
setting may operate alarm output.
It enables to set not in Password mode, and if in Password mode, it is available only in
Admin mode.

※12.

Be sure that the set as default.pms, every setting is initialized. It enables to set not in

Password mode, and if in Password mode, it is available only in Admin mode.

※13.

Memory Clear(Log file delete) function is not available as communication function.

3.4.8

USER INFORMATION SETUP(User information setting)

No(Address)

Func

R/W Parameter

Description

Set range

Unit Default Note

401701 (06A4) 03/06/16 R/W Password

Password

mode

0:Disable, 1:Enable

Disable

401702 (06A5) 03/06/16 R/W Login Admin

Administrator log in

‘0000’ to ‘9999’

‘0000’

Enables in

Password mode.

401703 (06A6)
401704 (06A7) 03/06/16 R/W Change Admin Change password by

administrator

‘0000’ to ‘9999’

‘0000’

Enables to set in

Admin mode.

401705 (06A8)
401706 (06A9) 03/06/16 R/W User Lock

Change user authority

0:OFF, 1:LOCK1,

2:LOCK2, 3:LOCK3

OFF

Enables to set in

Admin mode.

401707 to

401750

03/06/16 R/W Reserved

※

If changing general user to administrator by communication, KRN100 is also changed as

administrator authority. Or by KRN100 front key, it operates as administrator authority from

Modbus communication.

Summary of Contents for krn100 series



















































































Search results

Summary of Contents for krn100 series

Reviews:

Related manuals for krn100 series

Brands by name

Popular brands

Autonics krn100 series, User Manual

Search results

Summary of Contents for krn100 series

Reviews:

Related manuals for krn100 series

Brands by name

Popular brands