A-68
AiSA-D Series
-|Transparent setting guide|-
▣
Features
AC Type 2-Phase Closed-Loop Stepper Motor Driver
● Brake operation for safe control of vertical load at power OFF and alarm occur. (Built-in brake type)
● Higher cost-efficiency compared to servo motor drivers
● Torque control mode supported
● Able to check alarms and status with Alarm/Status display part (7 segment)
● Rapid response which is advantageous for the short distance continuous operation
● Able to implement Low frequency operation and high torque in low speed area
● Low current drive at middle.high speed area
● Max. stop torque at current down mode (available vertical load attaching)
● Easy to set various Gain with rotary switch
● Applicable to the precision equipment such as optical inspection equipment
with the features of maintaining torque in stop and having no micro vibration (hunting)
● Various resolutions
: 500, 1000, 1600, 2000, 3200, 3600, 5000, 6400, 7200, 10000 (10 steps)
● 10-levels of resolution setting
● Frame size 60mm, 86mm (Applied Motor: AiA-M Series)
● Filed requiring preciseness such as semiconductor equipment, 3D printer, optical inspection equipment, chip mounter,
cartesian robot, conveying equipment, and alignment stage.
▣
Applications
Please read “Safety Considerations”
in the instruction manual before using.
▣
Ordering Information
Series
Item
Category
Motor frame size
Motor axial length
Encoder resolutions
Brake
Ai
60
D
M A
60
60×60mm
86
86×86mm
No mark
Standard type
B
Built-in brake type
A
10,000PPR(2,500PPR×4-multiply)
M
48mm
L
69mm
M
60mm
L
75mm
D
Driver
A
AC Power
S
S
tandard
Ai
A
rtificial
i
ntelligence
S A
Power
