Autonics AiC Series, User Manual

Page: 80 / 88

11 Driver Function
80 © Copyright Reserved Autonics Co., Ltd.
11.2.3 Zero Home Search (home search method=2)
It operates home search by zero point (absolute coordinate=0) when there is no home sensor,
limit sensor.
1st
Set the zero (absolute coordinate=0) as home.
For changing home position, use the position reset.
If changing zero position by I/O, move the zero to the desired position and supply
“RESET” signal and it resets.
When reset or resupplying power, the zero point is also reset.
2nd
The set direction at
“Home Search Direction” is ignored and it operates drive at the
set home direction.
3rd
It starts drive with the set start drive speed at
“Home Search Start Speed”, and it
operates acceleration drive with the set acceleration time at
“Home Search
Acceleration Time
”.
4th
After acceleration drive is complete, it operates constant speed drive with the set max.
drive speed at
“Home Search Max speed”.
5th
When it is close to home, it decelerates with the set deceleration time at
“
Home
Search Deceleration Time
” and it stops.
6th
After finding home,
“In-Position” signal utputs and the “INP. indicator (yellow)” turns
ON.
At
“Home Search Offset”, the other value except 0 is set, it moves for the setting value with start
drive speed,
“In-Position” signal outputs, and the “INP. indicator (yellow)” turns ON.