TR2350AK
2022-02-19 © Automotive Data Solutions Inc. 10/15
Following a remote start command, please note that the engine will turn off when any door is physically opened
during the remaining engine runtime.
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing, the remote starter must be placed in ‘Valet Mode’. The ‘Valet Mode’
will disable remote start functionality. To activate or deactivate the ‘Valet Mode’, follow the instructions below:
With Vehicle Key:
Cycle ignition OFF/ON 2x rapidly, then press brake 3x.
FUNCTION
# OF PARKING LIGHT FLASHES
Valet Mode ON
1
Valet Mode OFF
2
With iDatastart Remote:
Turn ignition ON, then press
FUNCTION
# OF PARKING LIGHT FLASHES
Valet Mode ON
1
Valet Mode OFF
2
With iDatastart Antenna:
Turn ignition ON, then press & hold button for 5 seconds
FUNCTION
# OF PARKING LIGHT FLASHES
Valet Mode ON
1
Valet Mode OFF
2
REMOTE START TROUBLESHOOTING
If your iDatastart remote fails to start the vehicle, the parking lights will flash three times immediately, then
flash a number of times according to the errors below:
