background image

Patent No. US 8,856,780 CA 2759622

CODE ALARM

>>

  

>>

  

01

ENGINE

START

STOP

OFF ACC

ON START

ON

  

02

  

03

  

04

  

05

  

06

  

07

  

08

ENGINE

START

STOP

OFF ACC

ON START

OFF

  

09

  

10

  

11

  

TYPE 2 - REMOTE PROGRAMMING - 1 OF 1

The following procedure programs 

aftermarket remotes to the remote starter.

WARNING: Program aftermarket remotes 

before usage. A maximum of four [4x] 

aftermarket remotes per system.

Set ignition to ON position.

Press and hold the antenna button for 10 

seconds.

The parking lights will fl ash three times [3x], 

the horn will chirp three times [3x].

The remote starter LED will turn RED and the 

antenna LED will fl ash.

Press once [1x] on LOCK button of aftermarket 

remote.

The remote starter LED will fl ash GREEN once 

[1x] then will turn RED.

To program additional remotes: repeat steps 5 

to 6 using each additional remote.

Set ignition to OFF position.

The remote starter LED will turn OFF and the 

antenna LED will turn OFF.

The parking lights will fl ash three times [3x].

Remote Programming completed.

www.idatalink.com

Automotive Data Solutions Inc. © 2022

FLRSBA

PAGE 15 OF 45

• 20220113

CODE ALARM

Summary of Contents for FlashLogic FLRSBA














































Reviews: