Use and buttons to choose Modbus address (001 to 247).
On completion of the entry procedure, press button to confirm the
setting and press button to return the main set-up menu.
(The range is from 001 to 247)
From the set-up menu, use and buttons to select the address ID.
The current digit to be set flashes and is set using the and buttons.
Press to confirm each digit setting. The SET indicator appears after the last digit has
been set.
After setting the last digit, press to exit the number setting routine. The SET indicator
will be removed.
When Setting up the unit, some screens require the entering of a number. In particular,
on entry to the setting up section, a password must be entered. Digits are set individually,
from left to right. The procedure is as follows:
4.1.2 Number Entry Procedure
4.2 Communication
Where the meter has been supplied with a RS 485 protocol output the individual
parameters are set by using the front key panel.
4.2.1 Modbus RS 485 Address
Press button to enter the selection routine. The current setting will
be flashing.
V/A
ESC
P
MD/
PF/HZ
P
MD/
PF/HZ
P
4.1.1 Menu Option Selection
Use the and buttons to scroll through the different options of the set-up menu.
Press to confirm your selection.
If an item flashes, then it can be adjusted by the and buttons.
Having selected an option from the current layer, press to confirm your selection. The
SET indicator will appear.
Having completed a parameter setting, press to return to a higher menu level. The
SET indicator will be removed and you will be able to use the and buttons for
further menu selection.
On completion of all setting-up, press repeatedly until the measurement screen is
restored.
V/A
ESC
V/A
ESC
MD/
PF/HZ
P
MD/
PF/HZ
E
E
E
V/A
ESC
MD/
PF/HZ
P
MD/
PF/HZ
P
E
E
www.autometers.co.uk
6