(The range is from 001 to 247)
From the set-up menu, use and buttons to select the address ID.
Use and buttons to choose Modbus address (001 to 247).
On completion of the entry procedure, press button to confirm the
setting and press button to return the main set-up menu.
(The range is from 001 to 247)
From the set-up menu, use and buttons to select the address ID.
www.autometers.co.uk
9
(It shows pulse width of 200ms)
From the set-up menu, use and buttons to select the Pulse width
option.
Press to enter the selection routine. The current setting will flash.
Use and buttons to choose pulse rate. On completion of the
entry procedure, press to confirm the setting and press to
return to the main set up menu.
4.6.2 Pulse Duration
4.7 Communication
The pulse width can be selected as 200 (non-MID version meters only), 100 (default) or
60ms.
Where the meter has been supplied with a Rs 485 protocol output the individual
parameters are set by using the front key panel.
4.7.1 Modbus RS 485 Address
4.7.2 Mbus address
*A-400MB only
Press button to enter the selection routine. The current setting will
be flashing.
Press button to enter the selection routine. The current setting will
be flashing.
Secondary address:
00 00 00 01 to 99 99 99 99
V/A
ESC
V/A
ESC
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
MD/
PF/HZ
P
E
E
E
E
E
