8
Tech Support 770-844-4200
www.productivity2000.com
Document Name
Edition/Revision
Date
P2-8AD4DA-1-DS
1st Ed.
3/9/2015
Copyright 2015, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
WARNING:
To minimize the risk of potential safety problems, you should follow all
applicable local and national codes that regulate the installation and operation of
your equipment. These codes vary from area to area and it is your responsibility
to determine which codes should be followed, and to verify that the equipment, in-
stallation, and operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to
follow all applicable codes and standards. We do not guarantee the products
described in this publication are suitable for your particular application, nor do
we assume any responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or operation of this equip-
ment, or if you need additional information, please call Technical Support at
770-844-4200.
This publication is based on information that was available at the time it was
printed. At AutomationDirect.com
®
we constantly strive to improve our products
and services, so we reserve the right to make changes to the products and/or
publications at any time without notice and without any obligation. This publication
may also discuss features that may not be available in certain revisions of the
product.
Removable Terminal Block Specifications
Part Number
P2-RTB
P2-RTB-1
Number of
positions
18 Screw Terminals
18 Spring Clamp Terminals
Wire Range
30 - 16 AWG (0.051 - 1.31 mm²)
Solid / Stranded Conductor
3/64 in. (1.2 mm) Insulation Maximum
1/4 in (6 - 7 mm) Strip Length
28-16 AWG (0.081 - 1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Maximum
19/64 in (7 - 8 mm) Strip Length
Conductors
“USE COPPER CONDUCTORS, 75ºC” or equivalent.
Screw Driver
Width
1/8 in (3.8 mm) Maximum
Screw Size
M2
N/A
Screw Torque
2.5 lb·in (0.28 N·m)
N/A
