2
www.productivity2000.com
Tech Support 770-844-4200
General Specifications
Operating Temperature
0º to 60ºC (32º to 140ºF)
Storage Temperature
-20º to 70ºC (-4º to 158ºF)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1800VAC applied for 1 second
Insulation Resistance
> 10MΩ @ 500VDC
Heat Dissipation
800mW
Enclosure Type
Open Equipment
Agency Approvals
UL508 File E139594, Canada & USA
CE (EN61131-2*)
Module Keying to Backplane Electronic
Module Location
Any I/O slot in a Productivity2000 System
Field Wiring
ZIPLink Wiring System ONLY. See “Wiring Options” on
page 5. Must use copper conductors 75ºC or equivalent.
EU Directive
See the “EU Directive” topic in the Productivity2000
Help File. Information can also be obtained at:
www.productivity2000.com
Connector Type
24-Pin Molex Style 43025-2400
Weight
90g (3.2 oz)
Input Specifications
Input Channels
16 sinking
Module Signal Input Range
0–20 mA
Signal Resolution
16-bit
Resolution Value of LSB
(least significant bit)
0–20 mA = 0.305μA per count
(1 LSB = 1 count)
Data Range
0 to 65535 counts
Input Type
Single-ended (1 common)
Maximum Continuous Overload
±31mA
Input Impedance
250Ω ±0.1% 1/4W
Filter Characteristics
Low Pass, -3dB @ 100Hz
Sample Duration Time
4ms per channel
(does not include ladder scan time)
All Channel Update Rate
112ms
Open Circuit Detection Time
Zero reading within 1s
Conversion Method
Successive approximation
Accuracy vs. Temperature
±25PPM / ºC maximum
Maximum Inaccuracy
0.1% of range
(including temperature drift)
Linearity Error (end to end)
±10 LSB maximum (±0.015% of range)
Monotonic with no missing codes
Input Stability and Repeatability
±10 LSB
Full Scale Calibration Error
(not including offset)
±10 LSB maximum (±0.015% of range)
Offset Calibration Error
±10 LSB maximum
Max Crosstalk
-76dB, ±10 LSB
Recommended Fuse (external)
Edison S500-32-R, 0.032 A fuse
External DC Power Required
24VDC (-20% / +25%) 35mA
