2
Tech Support 770-844-4200
www.productivity2000.com
General Specifications
Operating Temperature
0º to 60ºC (32º to 140ºF)
Storage Temperature
-20º to 70ºC (-4º to 158ºF)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1800VAC applied for 1 second
Insulation Resistance
> 10MΩ @ 500VDC
Heat Dissipation
1.4 W
Enclosure Type
Open Equipment
Agency Approvals
UL508 File E139594, Canada & USA
CE (EN61131-2*)
Module Keying to Backplane Electronic
Module Location
Any I/O slot in a Productivity2000 System
Field Wiring
Use ZIPLink Wiring System or removable terminal block
(not included). See “Wiring Options” on page 5.
EU Directive
See the “EU Directive” topic in the Productivity Suite
Help File. Information can also be obtained at:
www.productivity2000.com
Connector Type (not included) 18-position removable terminal block
Weight
90g (3.2 oz)
Input Specifications
Input Channels
4
Module Signal Input Ranges
±10 VDC, ±5 VDC, 0-5 VDC, 0-10 VDC, 0-20 mA
Signal Resolution
16-bit
Resolution Value of LSB
(least significant bit)
1 LSB = 1 count
±10 V = 305μV
±5 V = 152μV
0-5 V = 76μV
0-10 V = 152μV
0-20 mA = 0.305μA
Data Range
0-65535 counts unipolar
-32768 to +32767 counts bipolar
Maximum Continuous Overload
±31 mA, current input
±100 V, voltage input
Input Impedance
1MΩ±10% voltage input
250Ω±0.1% 1/4 W current input
Hardware Filter Characteristics
Low Pass 1st order, -3dB @ 48Hz
Sample Duration Time
2ms per channel
(does not include ladder scan time)
All Channel Update Rate
8ms
Open Circuit Detection Time
Zero reading within 1s (current input only)
Conversion Method
Successive approximation
Accuracy vs. Temperature
±10PPM / ºC maximum
Maximum Inaccuracy
0.1% of range voltage, 0.2% of range current
(including temperature drift)
Linearity Error (end to end)
±0.01% of range max., ±10 V & ±5 V
±0.015% of range max., 0-10 V, 0-5 V & 0-20 mA
Monotonic with no missing codes
Input Stability and Repeatability
±0.035% of range (after 10 min. warmup)
Full Scale Calibration Error
±0.2% of range maximum
Offset Calibration Error
±0.065% of range maximum
Max Crosstalk
-96dB, 1 LSB
Recommended Fuse (external)
Edison S500-32-R, 0.032A fuse
on current inputs only
External DC Power Required
24VDC (-20% / +25%) 35mA
*Meets EMC and Safety requirements. See the D.O.C. for details.
