and Specifications
Installation and
Safety Guidelines
Installation, Wiring,
2–8
Installation, Wiring, and Specifications
Functional Specifications
Item
Specification
CPU
Intel Celeron
R
566MHz processor
Replaceable with Socket 370 Pentium
R
III or Celeron
R
Processors up to 850MHz
BIOS
AWARD: Flash BIOS, Plug & Play supported, 2Mbit
Chip Set
Intel
R
82440BX
Main Memory
168-pin DIMM slot x 3, Max. 768MB SDRAM
One stick 128MB pre-installed; 16, 32, 64, 128, or 256MB
DIMMs are available (use PC100–compliant)
Cache
128 KB on CPU L2
Video Port
ATI: 3D Rage Pro Turbo VGA controller, Display memory
4MB
Max: 1280 x 1024, 24 bit colors
Max: 1152 x 864, 32 bit colors
15 pin VGA connector
Keyboard/Mouse Port
PC/AT keyboard supported (Mini DIN 6-pin)
D4-470 comes with Y-adapter cable (Mini DIN 6-pin to DIN
5-pin + Mini DIN 6-pin)
A keyboard and mouse can be used simultaneously with this
adapter
FDD
3.5” FDD (1.44MB/720KB) x 1
IDE HD Interface
2.5” HD bay x 2 (One bay has a 6.0GB HD, the other bay is
unoccupied)
The height of HD must be less than 9.5mm
Transfer speed: 16.67 MB/sec (PIO transfer mode 4)
33MB/sec (Ultra DMA/33 transfer )
Serial Port
2 Ports
COM1, 2: RS-232C, 9-pin D-sub connector
16C550 compatible UART
Max. 115.2kbps
Parallel Port
1 Port
25-pin D-sub connector
This port supports the following modes:
SPP (Standard Parallel Port)
EPP (Enhanced Parallel Port)
ECP (Extended Capabilities Port)
LAN Port
1 Port
RJ–45 connector
Chipset: Intel 82558
Supports 10/100 Base–T Ethernet networking
SCSI port
Not Supported– No SCSI Interface on CPU–board
