Chapter 2: Setup and Operation
Stride MQTT Gateway User Manual, 1st Edition
2-10
Configure MQTT Broker
Check your MQTT broker for the settings it requires prior to configuring your gateway.
Click on the
MQTT
tab to define the connection to an MQTT broker.
• Set the
Broker Address
and
Broker Port
.
• Set the
ClientId
as required by your MQTT broker.
• Set the
Keep Alive
frequency (in seconds).
• Select
Clean session
if desired, to require renewal of subscriptions to the topics each time the client
reconnects to the broker.
• Set the
Username
and
Password
for the broker if necessary.
• Select
EnableTLS/SSL
and upload a certificate, private key, or CA certificate if necessary.