SR35 Quick-Start Guide
Stellar® SR35 Series Soft Starter Quick Start Guide – 1st Ed – 07/09/2020
5
H
andlIng
The SR35 soft start range is comprised of three frame sizes of various weights and
dimensions. See “Dimensions” on
for further information.
Prior to installing the SR35 unit, the installer should carry out a risk assessment. If
considered appropriate, a suitable handling device should be used.
Do not lift the SR35 unit by attachment to the 3-phase terminal connections or
busbars.
warnIng: hanDlIng anD lIftIng hazarD
e
nsure
the
area
below
any
equIpment
Is
clear
of
all
personnel
anD
property
. f
aIlure
to
follow
thIs
practIce
may
result
In
Death
,
serIous
Injury
,
or
Damage
to
equIpment
.
a
CCessorIes
The following accessories have been developed and tested for use with the SR35
range of soft starters:
•
SR35-KPD-REM Remote Keypad for SR35-017 to SR35-361 Provides remote
functionality for up to 32 soft starter units
•
SR35-PSU 100VAC – 240VAC power supply Provides mains voltage control power
and digital control functionality For use with SR35-017 to SR35-361
•
SR35-FAN-1 Cooling fan accessory for SR35-017 to SR35-065 only Increases the
number of starts per hour (see “Fan Option” on
)
•
SR35-FAN-2 Cooling fan accessory for SR35-077 to SR35-192 only Increases the
number of starts per hour (see “Fan Option” on
)
