Automation Direct ProSense DPM1 Series, User Manual

Page: 8 / 25

DPM1 User Manual, 1st Edition
User Manual - DPM1 Series Panel Meters
8
Wiring Terminals
CN2 and CN3 Terminals
CN1, CN4 and CN5 Terminals
CN1
AC
Supply
DC
Supply
1 Line 1 -VDC
2 Neutral 2 +VDC
CN2
1 +60V / +10VDC
2 +20mA DC
3 +100mV
4 -IN / - Excitation
5
+Excitation
(20V±5VDC @
30mA)
CN4
Relay 1
1
N.O. Contact
2
CN3*
1 -0/4-20mA
2 +0/4-20mA
CN5
Relay 2
1
N.O. Contact
2
CN3
CN1
CN5
CN4
CN2
Analog output terminals
(DPM1-A-A2R-H &
DPM1-A-A2R-L only)
1
2
1 1
1 2
2 2
1 2 5 3 4
* Analog output terminals
(DPM1-A-A2R-H & DPM1-A-A2R-L
only)
Terminals
Connector CN1 CN2 CN3 CN4 CN5
Wire cross section
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 0.5mm²
(28 to 20 AWG)
0.08 to 0.5mm²
(28 to 20 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
Strip length 8 to 9mm 5 to 6mm 5 to 6mm 8 to 9mm 8 to 9mm
Manufacturer
Wago 231-
202/026-000
Wago 733-105 Wago 733-102
Wago 231-
102/026-000
Wago 231-
302/026-000
Cage clamp
connection
Insertion tool or
screwdriver with
0.5 mm x 3.0 mm
blade
Insertion tool or
screwdriver with
0.3 mm x 1.8 mm
blade
Insertion tool or
screwdriver with
0.3 mm x 1.8 mm
blade
Insertion tool or
screwdriver with
0.5 mm x 3.0 mm
blade
Insertion tool or
screwdriver with
0.5 mm x 3.0 mm
blade
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.