ADC MDM-TEL
Modem
Document
MDM-TEL Application Note.doc
Page 12 of 16
12
Last reviewed: 03/07/2002
Local
Modem
IBM Compatible
Remote
Modem
PLC
2. Choose the modem driver that you created earlier on your PC and enter in the phone number
for connecting to the desired PLC. You will need to add a “9” if this is required in your facility.
You may also need to add commas for time delays when appropriate. One comma equals
about one second:
3. Choose the K-sequence protocol and setup the time delays as shown below:
4. Choose Accept when complete and click “yes” to check the connection. DirectSOFT32 will
initiate the local modem and dial the remote modem and attempt to connect to the remote
PLC. If everything works correctly, then you will get no more Windows and you will see your
link in DSLaunch showing a good status.
