4
w
w
w
.
a
u
t
o
m
a
t
i
o
n
d
i
r
e
c
t
.
c
o
m
1
-
8
0
0
-
6
3
3
-
0
4
0
5
Copyright 2007-2018,
Automationdirect.com
Incorporated/All Rights Reserved Worldwide
Accessories & Replacement Parts:
Part Number
Description
ATM-CBL-VGA10
10 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.
ATM-CBL-VGA25
25 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.
ATM-CBL-VGA50
50 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.
ATM-CBL-DV2M
6 ft. (2 meter) DVI (type D) video cable. Connects ATM1700 and ATM1900 to a standard DVI-D
port. DVI cables provide a higher bandwidth video interface than the VGA cables.
ATM-CBL-DV3M
10 ft. (3 meter) DVI (type D) video cable. Connects ATM1700 and ATM1900 to a standard DVI-D
port. DVI cables provide a higher bandwidth video interface than the VGA cables.
ATM-CBL-10
10 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.
(touch screen models only)
ATM-CBL-25
25 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.
(touch screen models only)
ATM-CBL-50
50 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.
(touch screen models only)
USB-CBL-AB3
3-ft (0.9 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices. (touch screen models only)
USB-CBL-AB6
6-ft (1.8 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices. (touch screen models only)
USB-CBL-AB10
10-ft (3 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices. (touch screen models only)
USB-CBL-AB15
15-ft (4.6 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices. (touch screen models only)
ATM-AC-CON
Replacement Power Wiring Connector for AC Powered Units.
ATM-CLIP
Replacement flat panel mounting clip kit. Package of 16 clips and screws.
ATM-CBL-VGA10
ATM-CBL-VGA25
ATM-CBL-VGA50
ATM-CBL-DV2M
ATM-CBL-DV3M
ATM-CBL-10
ATM-CBL-25
ATM-CBL-50
USB-CBL-AB3
USB-CBL-AB6
USB-CBL-AB10
USB-CBL-AB15
ATM-AC-CON
ATM-CLIP
WARNING
To minimize the risk of potential safety problems, you should
follow all applicable local and national codes that regulate the
installation and operation of your equipment. These codes vary from
area to area and it is your responsibility to determine which codes
should be followed, and to verify that the equipment, installation, and
operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure
to follow all applicable codes and standards. We do not guarantee the prod-
ucts described in this publication are suitable for your particular applica-
tion, nor do we assume any responsibility for your product design,
installation, or operation.
If you have any questions concerning the installation or operation of
this equipment, or if you need additional information, please call
Technical Support at 770-844-4200.
This publication is based on information that was available at the time
it was printed. At
Automationdirect.com
®
we constantly strive to
improve our products and services, so we reserve the right to make
changes to the products and/or publications at any time without notice
and without obligation. This publication may also discuss features that
may not be available in certain revisions of the product.
Additional Help and Support
• For product support, specifications, installation, and
troubleshooting, a Hardware User’s Guide, ATM-
USER, is included on the supplied Documentation
and Driver CD, or downloadable from the Online
Documentation area of the
AutomationDirect
Web site.
• For additional technical support and questions, call our Technical
Support team @ 770-844-4200.
