GENERAL CRUISE CONTROL FUNCTIONS
Activate Cruise Control
The
button is used to enable the cruise control, it should be
to operate
the cruise control and should be turned
when not needed. Turning cruise control
is performed by sliding the
switch to the ON position.
<<On / Off>>
ON
OFF
ON
<<On / Off>>
SET
COAST
RESUME
ACCEL
ON
OFF
Set / Coast Button
Programing Vehicle Speed
50 km/h
<<Set / Coast>>
Setting Vehicle To A Slower Speed
“Set / Coast”
Setting Vehicle To A Higher Speed
<<Set/Coast>>
To program and memorize vehicle speed in cruise control, verify that the control arm and
"cruise main"orange indicator is ON, drive vehicle to a speed of at least
, once the
desired speed is reached press and release the
button, slowly release
the accelerator pedal you should now be cruising at the desired speed.The "Cruise Main"
indicator should become green.
Press and release the
button, every time the button is pressed and released
you will decelerate approx 2 km/h, if the button is pressed and held vehicle will decelerate
until button is released.
Press accelerator pedal to achieve the desired speed, then press and release the
button, the vehicle will be set to the desired speed.
The “Resume / Accel” Button
Accelerating While In Cruise Mode
In order to resume to pre-set vehicle speed after cruise control was deactivate by brake
peda, turn the
button, the vehicle will then either accelerate or
decelerate to the previous set speed.
To accelerate to a new cruising speed, briefly turn the
handle. Vehicle
should accelerate approx 2 km/h every time handle is turned. To set to a new cruising
speed you can also turn and hold the “
button until the new desired
cruising speed is reached.
“Resume / Accel”
Note: The resume function will only be available after the vehicle was previously
set to a desired speed.
“Resume / Accel”
Resume / Accel”
G8501A
2008-02
4
MAZDA CRUISE CONTROL FUNCTIONS
Set / Coast Button
Programing Vehicle Speed
50 km/h
<<Set / Coast>>
Setting Vehicle To A Slower Speed
“Set / Coast”
Setting Vehicle To A Higher Speed
<<Set/Coast>>
To program and memorize vehicle speed in cruise control, verify that the control arm and
"cruise main"orange indicator is ON, drive vehicle to a speed of at least
, once the
desired speed is reached press and release the
button, slowly release
the accelerator pedal you should now be cruising at the desired speed.The "Cruise Main"
indicator should become green.
Press and release the
button, every time the button is pressed and released
you will decelerate approx 2 km/h, if the button is pressed and held vehicle will decelerate
until button is released.
Press accelerator pedal to achieve the desired speed, then press and release the
button, the vehicle will be set to the desired speed.
Activate Cruise Control
Set / Coast button
The
switch is used to enable the cruise control arm, it should be
to
operate the cruise control and should be turned
when not needed. Turning cruise
control arm
is performed by sliding the
switch to the ON position.
<<On / Off>>
ON
OFF
ON
<<On / Off>>
To activate the Mazda cruise control, press Set/Coast and turn Resume/Accel at
same time for 2 seconds. (The "Cruise Main" light in the cluster lights up.) Do
the same operation to deactivate Mazda cruise. (The Orange "Cruise Main" light
goes OFF.) Go to
section to program vehicle speed.
The “Resume / Accel” Button
Accelerating While In Cruise Mode
In order to resume to pre-set vehicle speed after cruise control was deactivate by brake
peda, turn the
button, the vehicle will then either accelerate or
decelerate to the previous set speed.
To accelerate to a new cruising speed, briefly turn the
handle. Vehicle
should accelerate approx 2 km/h every time handle is turned. To set to a new cruising
speed you can also turn and hold the “
button until the new desired
cruising speed is reached.
“Resume / Accel”
Note: The resume function will only be available after the vehicle was previously
set to a desired speed.
“Resume / Accel”
Resume / Accel”
SET
COAST
RESUME
ACCEL
ON
OFF
G8501A
2008-02
5
