© 2005 Directed Electronics, Inc.
IIn
nssttaallllaattiio
on
n G
Gu
uiid
dee
P
PR
RE
EC
CA
AU
UT
TIIO
ON
NS
S
1.
This unit should be installed by an authorized Directed dealer.
2.
When selecting a location to install this unit, be sure it does not interfere with the driver’s
ability to operate the vehicle or the driver's or passenger's safety.
3.
This product is designed to operate with a 12V DC, negative ground battery system.
4.
Disconnect the ground wire from the battery terminal prior to connecting the unit to the elec-
trical system.
N
NO
OTTEE:: Head units with security codes will have to be reset after battery power is
restored.
5.
The wiring from some other products or accessories might bear similar color code as this prod-
uct; however, they might be for other functions. Please refer to the electrical connection diagrams
of this product prior to installation to avoid improper connection.
6.
Use proper connectors and insulation to prevent electrical damage to the unit.
6.
Do not connect the yellow wire and red wire together of this product directly to the +12V.
Connect the red wire of this product to the ACC of the ignition key switch and yellow wire to +12V.
Failure to do so may result in discharge of the battery.
7.
Only supplied accessories should be used to avoid damage to the unit during installation.
8.
Ensure that the display monitor is suitably installed at a location, such that it will not obstruct
the rear view mirror and/or the air condition vents or operation of a sunroof.
9.
Do not install this unit at a declining angle exceeding 30 degrees.
10. Do not install screws over the plane surface, which may affect the LCD screen deployment or
retract function.
17
