AUTOLIFT ONDA OB Series, Instruction Manual

Page: 20 / 38

INSTALLATION
6
Lift
DEVICE
ONDA
MODEL
20
6.5 INSTALLATION ON A VEHICLE
Installation on a vehicle must be performed exclusively by Autolift staff or authorised
installers.
Autolift declines all liability to damage to persons, property or the machine due to
installation on a vehicle not performed by authorised persons.
Installation of the Lift
Please remove the packaging film when the lift is still on the pallet. Please check that the lift correspond
to your order and that all parts are delivered-
After that unscrew the lift from the Pallet. Through a fork lift or a crane take the lift from the pallet to the
vehicle floor.
Put the lift in its position, close to the vehicle door.
WARNING
USE TEMPORARY SUPPORTS TO GRANT THE STABILITY OF THE LIFT WHEN IT IS NOT FIXED
Please settle the lift position so that:
- The distance (a) between the base plate and the internal part of the door is minimum 50cm
- The minimum distance (b) between the handrails or between the platform and the door is min
20mm
- The platform in the centre with reference to the door opening or that it is decentralized in order to
keep a minimum space of 30mm between the handrail and the door opening or the open door
- The handpump and its handle are accessible