PEGGY 06
ASSEMBLY
Assembling the castors
1.
Turn the container upside down.
2.
Insert the castor assemblies into the base of
the tank.
Fitting the motor
1.
When fitting the motor to the tank,
position it so that the motor securing
clips on the tank align with the fastening
points on the motor.
2. Fasten the motor securing clips to the motor,
making sure that they lock into place correctly.
3. To remove the motor, open the motor
securing clip and lift the motor out of the tank.
Fitting the handle
1. Align the holes on either side of the handle
with the holes in the top side of the motor.
2. Insert two screws into the handle and
tighten with a screwdriver.
Fitting the dust bag
1.For vacuuming fine, dry dirt it is recommended
that you fit the dust bag. The dust bag is suitable
for dry vacuuming only. Using the dust bag makes
it easier to dispose of the dust that has been
collected.
3.
To attach, slip the dust bag over the vacuum
inlet.
