Quick Reference Guide
14
Starting a diagnostic session
1.
From the ‘Vehicle Selection’ screen, select the relevant vehicle and then system
for diagnosis.These options will appear over a number of consecutive screens.
2.
Selecting a system will automatically prompt the software to begin
communication.
3.
The communication LED on the Vehicle Interface will begin to flash, confirming
that the Autodiagnos PC Pro software is connecting to the system.
4.
When the vehicle is ready for diagnostic tests, the diagnostic menu items
become enabled.
AU0073s
PC Pro Quick Start Guide.book Page 14 Monday, September 13, 2010 10:02 AM
