manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 295

Shaded image

Shading with Edges Model Graphics Style

The Shading with Edges tool displays the image in shaded mode, but with all non-occluded edges drawn as
well. A default light source provides illumination for the shaded elements. This tool affects the current view
only.

Setting up Shadow Studies

You can include shadow studies as part of your presentation views. Shadows are available for 2D and 3D
model views.

To set up shadow studies, you can vary shadow and sun intensity. You can also define settings for sunlight
that produces the shadows.

Casting Shadows

1

On the View Control Bar, click 

 (Shadows Off/On)

 ➤ 

Graphic Display Options.

2

Under Sun and Shadows, select Cast Shadows.

3

If enabled, use the sliders or enter values to vary sun and shadow intensity.

Shadow intensity controls the darkness of the shadows. Sun intensity changes the intensity of
ambient color. Valid values are between 0 and 100.

4

Click OK to apply changes.

For information about sun and shadow settings, see 

Defining the Sunlight Source for Shadows

 on page 253.

For information about silhouette edges, see 

Applying or Removing a Line Style for a Silhouette Edge

 on page

254.

Defining the Sunlight Source for Shadows

1

Click Manage tab

 ➤ 

Project Settings panel

 ➤ 

Settings drop-down

 ➤ 

Sun and Shadow Settings.

Model Graphics Styles | 253

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands