manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 1249

See 

Setting Family Geometry Visibility

 on page 513.

d

Click OK.

6

Save the family.

7

Load the family into a project.

Specifying a Render Appearance for an RPC Family

An RPC family is a Revit entourage family created using the RPC Family.rft or Metric RPC Family.rft template
files. (See 

Creating an RPC Family

 on page 1206.) For these entourage objects, use the following procedure to

specify RPC files for their render appearances.

To specify an RPC render appearance

1

Open the Revit RPC family in the Family Editor.

2

Click Family Properties panel

 ➤ 

Types.

3

For Name, select the family type to modify.

4

In the Family Types dialog, for Render Appearance, click in the Value column.

The Render Appearance Library displays.

5

Locate the desired render appearance, select it, and click OK.

See 

Searching for a Render Appearance

 on page 491.

6

In the Family Types dialog, for Render Appearance Properties, click Edit.

7

Specify parameters for the render appearance, and click OK.

See 

Render Appearance Properties for RPC Objects

 on page 1207.

8

In the Family Types dialog, click Apply.

9

(Optional) Repeat this process for other family types defined for the RPC family.

10

Click OK.

11

Save changes to the RPC family.

Render Appearance Properties for RPC Objects

The properties for render appearances vary depending on the type of RPC object. The following topics
describe the render appearance properties for each RPC type.

NOTE

If you purchase additional RPC content, those render appearances may display properties that are not listed

in the following sections. For information about those properties, see the ArchVision documentation.

Automobile Properties

Description

Property

General

Whether the rendered image shows a reversed, mirror reflection of the vehicle
on other surfaces, such as glass. When this option is cleared, the rendered

Cast Reflections

image shows a repeat image in the reflecting surface instead of a reversed,
mirror image. See 

Cast Reflections

 on page 1210.

Specifying a Render Appearance for an RPC Family | 1207

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands