manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 1241 / 1638

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 1241

Opening the Artificial Lights Dialog

The Artificial Lights dialog lists all lighting fixtures in the building model, including ungrouped lights and
grouped lights. Use this dialog to create and modify light groups, and to add or remove individual lighting
fixtures in groups.

When you open this dialog from a 3D view, you can also use it to dim or turn on or off light groups or
individual lighting fixtures for rendering. See 

Dimming Lights

 on page 1197 and 

Turning Lights On and Off

on page 1202.

You can open the Artificial Lights dialog from the Rendering dialog or from any view that contains lighting
fixtures.

To open the Artificial Lights dialog from a view

1

In a Revit Architecture project, open a view that contains one or more lighting fixtures.

2

Select a lighting fixture.

3

On the Options Bar, for Light Group, select Edit/New.

To open the Artificial Lights dialog from the Rendering dialog

1

In a Revit Architecture project, open a 3D view.

2

Open the Rendering dialog.

See 

Opening the Rendering Dialog

 on page 1222.

3

Under Lighting, for Scheme, select a setting that includes artificial lights.

4

Click Artificial Lights.

Creating a Light Group

1

Open the Artificial Lights dialog.

See 

Opening the Artificial Lights Dialog

 on page 1199.

2

Under Group Options, click New.

3

In the New Light Group dialog, enter a name for the light group, and click OK.

In the Artificial Lights dialog, the new light group name displays in the list under Grouped
Lights.

4

Add lights to the group.

See 

Adding and Removing Lights in a Light Group Using the Artificial Lights Dialog

 on page

1200.

5

(Optional) Turn the light group on or off for rendering.

See 

Turning Lights On and Off

 on page 1202.

Adding and Removing Lights in a Light Group

You can add and remove lights in a 

light group

 in several ways, depending on your current point in the

software.

Adding and Removing Lights in a Light Group from a View

1

Open a project view that displays lighting fixtures.

2

Select a lighting fixture.

Light Groups | 1199

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments