manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 1100 / 1638

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 1100

2

Select a viewport for a view on the sheet.

The Type Selector displays a list of available viewport types.

3

Click Modify Viewports tab

 ➤ 

Element panel

 ➤ 

Element Properties drop-down

 ➤ 

Type Properties.

4

On the Type Properties dialog, click Duplicate.

5

In the Name dialog, enter a name for the new viewport type, and click OK.

6

Complete the parameters for the viewport type.

See 

Viewport Type Properties

 on page 1058.

7

Click OK.

Revit Architecture applies the new viewport type to the selected viewport.

Applying a Viewport Type

After 

creating a viewport type

, you can apply it to viewports on sheets in a project. The following procedure

assumes that you have created sheets in a project, placed views on the sheets, and created one or more
viewport types.

To apply a viewport type to a view on a sheet

1

Open a sheet.

2

Select a viewport.

3

Click Modify Viewports tab

 ➤ 

Element panel, and from the Type Selector drop-down, select the

viewport type to apply to the viewport.

Revit Architecture applies the viewport type to the selected viewport.

Modifying Viewport Type Properties

1

On a sheet, select a viewport, and click Modify Viewports tab

 ➤ 

Element panel

 ➤ 

Element

Properties drop-down

 ➤ 

Type Properties.

2

Edit viewport type properties.

See 

Viewport Type Properties

 on page 1058.

3

Click OK.

Viewport Type Properties

Description

Name

Specifies the type of view title to use. The view title type specifies the information that is displayed
in a view title and its text attributes. Select a view title type from the list, or, to omit a view title,
select none. See 

View Title Types

 on page 1061.

Title

Controls the display of the view title. Use one of the following values:

Show Title

■

Yes

: Display view titles.

■

No

: Do not display view titles.

■

When multiple viewports

: Display view titles only when a sheet contains multiple views. If a

sheet contains a single view, do not display the view title.

1058 | Chapter 17   Preparing Construction Documents

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments