manualshive.com logo in svg

Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010, User Manual, Page: 380 / 878

Share
Download
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual Download Page 380

Wiring a junction box to a light with electrical
snaps

Connecting one cable tray to another with wire ways snaps

For more information about AutoCAD MEP snaps, including how to enable or disable them, see 

Using

AutoCAD MEP Snaps

.

Customizable Electrical Content

Typically, electrical content is created by CAD managers or other users in a similar functional role. There
are 2 types of electrical content:

■

Style-based content. 

This refers to objects that are defined by styles, which are sets of properties and

associated view blocks. In electrical drawings, style-based content includes devices, panels, wires, and
schematic objects for schematic diagrams.

■

Catalog-based content.

 This refers to objects that are defined by part definitions and associated part

models, and that are grouped into part catalogs. In electrical drawings, catalog-based content includes
electrical equipment (also called multi-view parts, MvParts, or parts), conduits, cable trays, and fittings.
You specify systems (a type of style) for catalog-based content. A system stores properties that are shared
by all building system objects assigned to the system. This gives a consistent look and feel to the electrical
systems in a drawing. For more information, see 

Working with Systems

 on page 93.

For a general introduction to these content types, see 

Working with Style-Based Content

 on page 85 and

Working with Catalog-Based Content

 on page 79.

Style-Based Content

You can create the styles that define devices, panels, wires, and schematic objects from scratch using Style
Manager. For an overview of this process, see 

Workflow for Creating Style-Based Content

 on page 599.

Additionally, there are several ways to convert single objects or batches of objects to device styles or schematic
symbol styles. You can

■

Convert a single AutoCAD block, MvBlock, or MvPart to a device. In addition to the converted device,
this creates the associated device style.

362 | Chapter 9   Drawing Electrical Systems

Summary of Contents for 235B1-05A761-1301 - AutoCAD MEP 2010















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments